icon icon icon icon
Your position: Home > MultiRotor > Bind & Fly

Happy Model - Crux3NLR Nano LR ELRS Ready Long Range Drone

Item Code: HP037-0162
Login or Register to see prices.
  • Description

The Crux3NLR Nano LR is a 18650 style Nano Long Range FPV quadcopter BNF . Very simple and convenience, just plug a single 18650 battery and then bind to fly.  Crux3 NLR come with ELRSF4 2G4 flight controller which means it built-in ExpressLRS high performance radio link which made you get a better range and stable link.
The Crux3 NLR also comes with GPS and buzzer , so that would be much better for a long range FPV flight.  Although equipped with so many devices, the weight is only 68 grams, so we could get more flight time.

Notice: Battery not include, we recommend use Sony 18650 VTC6 battery for better performance.

New AIO 5in1 ELRSF4 2G4 flight controller
New 1202.5 brushless motor
18650 Single battery
High performance radio link
Cruise time around 17 min with a single 18650 battery

Brand Name: Happymodel
Item Name: Crux3 NLR

Wheelbase: 115mm
Size: 97mmx97mmx35mm(without propellers)
Weight: 68g(without battery)

Receiver option:
Built-in SPI ExpressLRS 2.4GHz receiver

Package includes:
Item Name No GPS version With GPS Version
Crux3 NLR Frame 1 1
ELRSF4 2G4 AIO 5-in-1 flight controller 1 1
Happymodel Mini M8N GPS 0 1
Buzzer 1 1
Happymodel EX1202.5 KV11500 brushless motor 4 4
Gemfan 75mm bi-blade Propellers(4cw+4ccw) 1 1
Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera 1 1
Onboard 5.8G 25mw~200mw 40ch vtx (Flight controller built-in) 1 1
Screw Driver 1 1
Propeller disassemble tool 1 1
Motor Mode: EX1202.5 KV11500
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ14mm*14.5mm
No.of Cells(Lipo):1S
Propellers Gemfan 75mm
Center Thickness:5mm
Prop Diameter:75mm
Center Hole diameter:1.5mm
Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI ExpressLRS 2.4GHz receiver

Built-in 5V 1A BECFlight controller
firmware target: CRAZYBEEF4SX1280
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV

Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT300
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz

Antenna : SMD antenna
Telemetry output Power: <12dBm

Receiver protocol to flight controller:  CRSF
Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module
Onboard 5.8g VTX Output power: 25mw~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band

Smartaudio ready
Happymodel Mini M8N GPS Chip Model: Mini M8N GPS
Position Accuracy: 2.0 m CEP
Sensitivity2 Tracking & Nav: –167 dBm
Cold starts: –148 dBm
Hot starts: –156 dBm

Update rate: 5HZ Default, up to 10HZ
Baudrate: 57600
Size: 20mm*20m*6mm

Weight: 6g
Cold start waiting time: 3~5minutes
Warm start waiting time: 0.5~1.5minutes
Caddx ANT 1200tvl camera Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL 
IMAGE: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio : >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
WDR: Global WDR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Work Temperature: -20~+60
Weight: 2g (N.W.)