This is the new iCharger S6 ! A compact balance Charger/Discharger/DC Power with high power, high current and high-performance power conversion circuit for LiPo, Lilo, LiFe, LiHV, LTO, NiZn, NiHM, NiCd, NiZn and Pb batteries. It has features as below.
The S6 charger offers the same functions and operations as the famous DUO-series products, but it has only one channel.
With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage protection, input undercurrent protection, etc.). 2A balance current. Incredible small size and light weight.
Featuring:
S6 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1100W, the maximum charge/discharge current of a channel is up to 40A
S6 supports 6s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-20s NiMH/NiCd batteries and 1-12s Pb batteries.
Digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage protection, input undercurrent protection, and etc.)
Intelligent cooling system for internal temperature regulation via the internal temperature sensor, to thereby control the fan speed.
Internal temperature protection: when the internal temperature exceeds the "Power Reduce Temperature", the output power is automatically reduced and the charger will shut down when temperature exceeds the "Shut-Down Temperature".
The S6 charger can save up to 32 parameters sets and support the data import/export to SD card.
A 2.4" IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge.
Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
S6 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc.
Supports upgrading the hardware program by USB port or SD card. S6 also supports the “Junsi Console” software and can display, plot and analyze the charge and discharge data by it.
Specifications:
Input voltage range: 9-32VDC
Maximum input current limit: <45A
Maximum charge/discharge current: 40A (input voltage >26,5V)
Maximum charge power capacity: 1100W
Maximum discharge power capacity: 40W
Maximum regenerative discharge power capacity: 1100W
Maximum extra discharge power capacity: 1200W @30V/40A
Maximum current drain for balancing: >2.0A
Input and output connector: XT90 male
Display type: 2.4 " IPS LCD (320×240)
Net weight: 200g
Dimensions: 83×71×36.5 ±0.5mm
