• iFlight ProTek35 HD BNF 4S
  • iFlight ProTek35 HD BNF 4S
  • iFlight ProTek35 HD BNF 4S
  • iFlight ProTek35 HD BNF 4S
  • iFlight ProTek35 HD BNF 4S
  • iFlight ProTek35 HD BNF 4S
1/1

iFlight ProTek35 HD BNF 4S

No. HP164-0120
SKU: HP164-0120-DJI
Login or Register to see prices
Received successfully
Coupon Code
CONTINUE SHOPPING
  • iFlight ProTek35 HD BNF 4S
  • iFlight ProTek35 HD BNF 4S
  • iFlight ProTek35 HD BNF 4S
  • Description

After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! 

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with 2203.5 motors. It also features the DJI Digital HD System, Beast F7 AIO Flight Controller, 45A 2-6S ESC, and the Nazgul 3535 propellers. 

Note: Battery, GoPro, and GoPro mount NOT included

 

Features

  • No Props or frame in view!
  • High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • DJI FPV Air Unit 720p 120fps FPV feed (record in 1080p/60fps)
  • Butter smooth 2203.5 3600KV (4S)
  • Pre-tuned with smooth freestyle settings

Pre-Tuned & Pre- Setup

  • Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check out this  linked article: "Firmware/Factory Dumps"
  • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
  • Please check out this linked article on "How to disable Angle-Mode, activate Acro-Mode"

Specifications

  • Board Beast Whoop F7 AIO 45A 
  • Motor: XING 2203.5 3600KV (4S)
  • Wheelbase: 151mm
  • Body Size: 118*94.5mmmm
  • Bottom plate thickness: 3.5mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 20mm (aluminum standoff height)
  • Propeller size: 3.5 inch
  • FC pattern: 25.5*25.5mm / 20*20mmmm
  • FPV cam spacing: 20mm
  • Weight: 348.3g (without battery)

FC // Beast F7 AIO

 

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • UARTs: 5
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280
  • Connector: Micro-USB
  • OSD: AT7456E
  • FC Firmware:IFLIGHT_F745_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 8.5g

 

ESC // 45A 2-6S

  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 200
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-S
  • RPM-Filter ready: Yes (JazzMaverick or JESC firmware)
  • Telemetry: no
  • ESC Firmware: BlheliS G-H-30
  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Dimensions: 32.5*32.5mm

Recommended Parts (Not Included)

  • Fullsend 4S 95C 1300mAh
  • DJI HD FPV Goggles
  • DJI Remote Controller (Mode 2)

Includes

  • 1 x ProTek35 Frame
  • 1 x DJI FPV Camera
  • 1 x DJI FPV Air Unit Module
  • 2 x DJI FPV Air Unit Antenna SMA
  • 1 x TPU Bracket for DJI Air Unit Module
  • 1 x TPU Antenna holder for DJI antenna
  • 2 x TPU camera side plate soft mount
  • 2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)
  • 1 x iFlight Lipo Strap 15*150mm (Color May Vary)
  • 1 x iFlight Lipo Strap 15*250mm (Color May Vary)
  • 1 x GoPro TPU bottom stand black (GoPro Protector not included)
Frequently Bought Together
more
Frequently Bought Together