• Matek F405 STD Betaflight Flight Controller for racing drone
  • Matek F405 STD Betaflight Flight Controller for racing drone
  • Matek F405 STD Betaflight Flight Controller for racing drone
  • Matek F405 STD Betaflight Flight Controller for racing drone
  • Matek F405 STD Betaflight Flight Controller for racing drone
  • Matek F405 STD Betaflight Flight Controller for racing drone
1/1

Matek F405 STD Betaflight Flight Controller for racing drone

No. HP024-0035
SKU:
Login or Register to see prices
Received successfully
Coupon Code
CONTINUE SHOPPING
  • Matek F405 STD Betaflight Flight Controller for racing drone
  • Matek F405 STD Betaflight Flight Controller for racing drone
  • Matek F405 STD Betaflight Flight Controller for racing drone
  • Description

Matek F405 STD OSD F4 Betaflight FC Flight Controller with built in OSD UK Stock.

This is the replacement and upgraded version of the F405 - OSD Board with a lot of improvements.
The F405-STD now features a built in OSD , Barometer and Black Box with MicroSD Card Slot.
STM32F405, ICM20602, BMP280, BFOSD, SD Card Slot, VCP+5x UARTs, 6x PWM / DShot outputs

 

The new Matek F405-OSD has built in Betaflight OSD, MicroSD card for blackbox.
Matek F405-STD Flight controller layout
f405-std-layout-2.jpg
f405-std-layout-3.jpg
Matek Flight controller F405 STD included

 

Features and Specs

  • MCU: 168MHz STM32F405RGT6
  • IMU: 32K ICM20602 gyro/accelerometer (SPI)
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • Built in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • SoftSerial on TX2, S5 or S6 optional
  • Camera control on S6 or DAC optional
  • Smartaudio & Tramp VTX protocol supported
  • Battery Voltage Sensor: 1:10
  • Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
  • BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
  • LDO 3.3V: Max.300mA
  • I2C1 SDA & SCL: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 6x PWM / DShot outputs without conflict
  • 2x 2812LED outputs option
  • 5x UARTs
  • 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x pair I2C1 pads
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
  • 36x36mm PCB with 30.5mm mounting holes
  • w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
  • w/ 4pcs M3 Anti-vibration Standoffs 

BRAND: Matek
MPN: Matek-f450-STD

Note : Please always test the board first using usb connection as returns cannot be accepted once the Flight Controller as been soldered.

Frequently Bought Together
more
Frequently Bought Together