icon icon icon icon
Your position: Home > MultiRotor > Flight controllers

MATEK - HALL CURRENT SENSOR 150A

Item Code: HP0024-0102
Login or Register to see prices.
  • Description

Specifications

  • Hall effect current sensor
  • No voltage drop and heat on current sensor components
  • Offset and Sensitivity are calibrated in factory
  • Continuous current rating: 0~150A DC
  • Sensitivity: 20mV/A,  INAV/BF scale = 200,  ArduPilot BATT_AMP_PERVLT = 50
  • VBAT voltage sense: 0~69V,  INAV scale = 2100,  BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0
  • Power Consumption: 17mA
  • Voltage offset error at zero current : +-10mV
  • Curr output voltage error: 5%
  • Operating Temperatures: -30~80 °C
  • 23 * 20* 23mm, 7g
  • step file HCS-150A_step.zip

Soldering pads

  • Vbat: for voltage sense, support 0~69V IN
  • Volt: = 1/21 Vbat, 0~3.3V out
  • Curr: Current signal, 0~3.3V out
  • 5V: power supply for HCS-150A board, support 4~13V IN, 17mA
  • G: GND
  • TX/RX: for firmware update and configure (to be supported)

Tips

  • mount Hall sensor far from iron and magnetic material